WELCOME
TO PROTON-POWER.CO.UK, WE CAN OFFER YOU THE
FOLLOWING:
•
Massive Fuel Savings – Up To 50% better
fuel efficiency
• Fast and Simple to Setup – in
only a few hours even for novices
• Boost performance whilst producing
cleaner emissions
• Affordable set-up – under £400!
BEAT
THE HIGH PETROL + DIESEL PRICES!
Use
this simple DIY Hydrogen Electrolyser Kit to
convert your fuel guzzling vehicle to a gas
– sipping hybrid by supplementing petrol
(or diesel) with FREE hydrogen derived from
water. It’s the most economical and practical
solution to high fuel prices. It’s easy
to install – an afternoon project even
the novice can do at home.
The
unit mounts conveniently in the vehicle engine
compartment. Afterwards just add electrolyte
at every oil change about every 3000 miles.
No additional maintenance is required of the
electrolyser system.
Polaris
series Hydrogen Electrolysers increase engine
combustion efficiency in petrol and diesel engine
powered motor vehicles. The electrolyser transforms
water (H20) to HHO through electrolysis. This
process, in principle, charges water with an
electrical current, which breaks the chemical
bond between hydrogen and oxygen. The resultant
hydrogen – oxygen gas (HHO) is delivered
to the engine air take. During the combustion
process HHO acts as a catalyst to greatly enhance
fuel combustion, dramatically increasing power
and fuel efficiency. The only product of this
process is water vapour. Many additional benefits
are realised from this process.
BENEFITS
OF THE POLARIS HYDROGEN ELECTRLYSERS
•
Increased performance, power and fuel economy
– typically 20% to 50%
• Engineered for performance, reliability
and affordability
• Constructed of high quality materials
• Reduce or eliminate exhaust pollution
• Reduce carbon build up and sludge in
engines
• Less frequent oil changes and tune ups
• Safe, since hydrogen is not stored but
used as it is generated
• Every unit is bench tested prior to
shipment to customer
YOU
WILL RECEIVE THE POLARIS HYDROGEN ELECTROLYSER
KIT
•
Complete hydrogen on demand generation and delivery
system
• Everything required to convert your
vehicle to a hybrid (minimal tools required)
• Standalone, self contained system does
not modify vehicle engine or computer
• Does not interfere with other on board
vehicle systems
• Does not affect factory warranty
• Easily installed or uninstalled
• Electrolytic cell is constructed of
durable, non reactive materials
• Nominal 1500ml / min output (results
vary greatly depending temperature, atmospheric
pressure, altitude etc)
• Innovative design combines bubbler (wet
flashback arrestor) and reservoir functions
• Easy to monitor and refill electrolyte
reservoir
• Electrolytic cell is automatically re-filled
from reservoir
KIT
CONTAINS THE FOLLOWING
•
Electrolytic cell, with leak proof neoprene
seals and stainless steel hardware and connections
that wont corrode – not copper –
brass etc
• Bubbler / electrolyte reservoir
• Electrode assembly employing eight 14
gauge stainless steel plates
• Electro mechanical relay
• Flashback arrestor relay
• Two, one way check valves
• 3.050 metres (10ft) of 6.4mm / 1/4in
Clear vinyl tubing
• 1.5 metres (5ft) of 6mm / 1/4in reinforced
gas line
• 6.4mm x 3.2 mm / 1/4in x 1/8in nylon
barb to MIP resistor
• Sight tube
• 3.355 / 11ft of 18awg red wire
• 0.355metres / 1ft of awg black wire
• 1.525 metres / 5ft of 12 awg red wire
• 1.525 metres / 5ft of 12 awg black wire
• Various crimp-on electrical connectors
• 6.4mm / 1/4in shrink sleeve
• Ten 200mm / 8in wire ties
• Automotive ATC fuse holder and 20 amp
fuse
• Mounting hardware for electrolytic cell
housing, bubbler reservoir and relay
• 1oz sodium hydroxide (MSDS included).
Protects electrolyte from freezing to -10c (14f).
Our low temp electrolyte is good to -30C (22f)
and is sold separately.
• Instruction manual: very comprehensive
& trouble shooting guide with accompanying
diagrams and schematics.
+ £10 Post & Packaging. Please
allow up to 28 days for delivery
|
